Meandros Roller Wheels Grey are made from the highest quality heavy duty synthetic materials, providing a tough and robust composition to withstand even the toughest use.

The grey rollers are recommended if you would like or need super strong wheels for higher loads and greater longevity. Bushes and bearings are removable and changeable, but are designed to be more permanent than the black Meandros wheels. Bearings and bushes require tools for fitting and removal, due to the harder tougher nature of the materials used.

For the discerning roller speargun builder or owner, these are the ultimate wheels, providing unparalleled strength and long life.

Designed for use on roller heads and muzzles with axles measuring 6mm. Fits roller muzzle heads of brands Meandros, MVD and Ermes and others with 6mm axles.

The roller has been designed to accept rubber bands of most dimensions up to 18.5mm. The removable hydro plugs have pre-installed spacers which help greatly with the right placement of the rollers on the speargun head of any construction.

Each roller wheel can be used with the bushes provided, or change one or two bushes for bearings. The Rollers can function with any setup one desires. Either with hydro lubricated bushes (standard), one ball bearing and one plug per roller (for lighter head weight) or by installing full ball bearing kits for large loads.

The roller wheel dimensions are: Width = 17mm, Outer diameter = 27.5mm, Inner diameter = 21mm.

• Price is for a pair of roller wheels for a roller speargun head
• Grey roller for hard heavy duty use, longevity or high loads
• To be used as a building, spare or replacement part
• Will fit speargun roller muzzles with 6mm axles
• Super strong synthetic materials are made to last
• Very high load bearing
• Can be used with rubbers up to 18.5mm
• For each roller wheel, you can add one or two bearings

NOTE: Roller head muzzles contain rotating bushes &/or bearings that require regular maintenance. Ensure after every use, regular freshwater washing takes place to remove any debris or saltwater. Avoid contact with dirt or sand as this will quickly degrade bearing surfaces. Bushes and bearings are consumable items that may need to be replaced, depending on conditions of use, load and correct maintenance.